Detail SICK Inductive Proximity Sensors IMP05 Series, Cylindrical Threaded Housing
SICK Inductive proximity sensors IMP05 Series, Cylindrical threaded housing
Model Name IMP05-01BNSVU2S
Part No. 6050110
At a glance
Pressure resistant up to 500 bar
Expected service life of up to 1 million pressure cycles
Expanded temperature range of up to 100 ° C
Sensing range of 1 mm flush
IP 68
Stainless steel housing with active surface made from stable high-performance ceramic
State-of-the-art ASIC technology from SICK
Gas-tight at the sensor face
Your benefits
Reduced maintenance costs
Extremely resilient and durable
Up to 50 times longer service life compared to conventional sensors under pressure cycles
Simple compensation of cylinder tolerances
Simple integration due to small design
Controlled piston deceleration
Increased piston service life due to collision prevention at the end of the work cycle
Features
Housing: Cylindrical
Thread size: M5 x 0.5
Sensing range Sn: 1 mm
Assured sensing range Sa: 0.8 mm
Pressure resistance: d 500 bar
Installation type: Flush
Switching frequency: 1, 000 Hz
Output type: NPN
Output function: NO
Electrical wiring: DC 3-wire
Enclosure rating: IP 68 1)
Connection type: Cable, 3-wire, 2 m
1) Sensing face
Mechanics/ electronics
Supply voltage: 10 V DC ... 30 V DC
Vacuum resistance: 10-8Torr 1)
Ripple: d 20 % 2)
Voltage drop: d 2 V 3)
Current consumption: d 10 mA 4)
Time delay before availability: d 30 ms
Hysteresis: 1 % ... 15 % 5)
Repeatability: d 5 % 6) 7)
Temperature drift ( of Sr) : ± 10 % , ± 15 % 8) 9)
EMC: According to EN 60947-5-2
Output current Ia: d 200 mA
Cable material: PUR
Conductor cross-section: 0.14 mm²
Cable diameter: Ø 3.5 mm
Short-circuit protection:
Reverse polarity protection:
Power-up pulse protection: -
Shock/ vibration: 30 g, 11 ms / 10 ... 55 Hz, 1 mm
Ambient operating temperature: -25 ° C ... + 100 ° C
Housing material: Stainless steel, Phynox
Housing cap material: Ceramics, ZrO2
Size support ring: 7.5 mm x 4.4 mm x 1 mm
Material support ring: FPM
Housing length: 27 mm
Thread length: 5 mm
Tightening torque, max.: d 5 Nm
1) Front 2) Of VS 3) With Ia = 200 mA 4) Without load 5) Typ. 8% 6) 7) 8) -25 ° C...+ 70 ° C 9) + 70 ° C...+ 100 ° C
Reduction factors
Note: The values are reference values which may vary
Carbon steel St37 ( Fe) : 1
Stainless steel ( V2A, 304) : 0
Copper ( Cu) : 0
Aluminum ( Al) : 0
Brass ( Br) : 0
Installation note
Remark: Associated graphic see " Installation"
Tampilkan Lebih Banyak