Back to Top

Hi, Guest!

  LOKASI :  Kota Surabaya

Bergabung Selama :

BAGIKAN :   

Bagikan :
  • OMRON
  • OMRON Digital Panel Meter K3TE Series

OMRON Digital Panel Meter K3TE Series

Update Terakhir
:
12 / 12 / 2019
Min. Pembelian
:
0
Dilihat Sebanyak
:
74 kali

Harga

CALL
Bagikan
:
PT. AUTOTEK JAYA ABADI melayani untuk pembuatan Sistem Otomatis baru maupun modifikasi dari sistem yang sudah ada untuk ditingkatkan efisiensinya. Sistem Otomatis ini meliputi keseluruhan aspek dari desain, pemilihan komponen sampai pembuatan dan pemasangan serta uji coba.

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.

Detail OMRON Digital Panel Meter K3TE Series

OMRON Digital Panel Meter K3TE Series Easy-to-use, Low-cost Digital Panel Meter that Accepts DC Input ? Compact DIN-size ( 96 x 48 ( W x H) ) body. ? Mounting thickness of only 3.5 mm required. ? Highly visible display with 14.2-mm-high LEDs. ? Easy-to-mount snap-in construction. ? Conforms to EMC standards EN61010-1 ( IEC61010-1) . Specifications ? Ratings Note: 1. An inrush current of approximately 0.5 A will flow at the moment the power is turned on and continued for approximately 2 ms. 2. The K3TE-V4@ @ does not conform to CE marking standards. ? Characteristics Note: IP51 is maintained when the water-resistive soft cover and bracket are used. IP50 will be, however, maintained without these water-resistive accessories. Supply voltage 100 to 120 VAC; 200 to 240 VAC ( 50/ 60 Hz) ; 24 VDC ( internally insulated) Operating voltage range  15% to + 10% of supply voltage Power consumption 3 VA ( at max. AC load) ; 1.3 W ( at max. DC load) ( see note) Insulation resistance 10 M min. ( at 500 VDC) between external terminal and case Dielectric strength AC model: 2, 000 VAC min. for 1 min between input terminal and power supply DC model: 500 VDC min. for 1 min between input terminal and power supply AC/ DC model: 2, 000 VAC min. for 1 min between external terminal and case Noise immunity AC model: 1, 500 V on power supply terminals in normal or common mode DC model: 480 V on power supply terminals in normal mode 1, 500 V on power supply terminals in common mode Vibration resistance Malfunction: 10 to 55 Hz, 0.5-mm single amplitude for 10 min each in X, Y, and Z directions Destruction: 10 to 55 Hz, 0.75-mm single amplitude for 2 hrs each in X, Y, and Z directions Shock resistance Malfunction: 98 m/ s2 for 3 times each in 6 directions Destruction: 294 m/ s2 for 3 times each in 6 directions Ambient temperature Operating:  10 to 55 C ( with no icing) Storage:  20 to 65 C ( with no icing) Ambient humidity Operating: 35% to 85% ( with no condensation) Ambient operating atmosphere No corrosive gas EMC ( EMI) EN61326+ A1 Industry Emission Enclosure: CISPR 11 Group 1 class A: CISRP16-1/ -2 Emission AC Mains: CISPR 11 Group 1 class A: CISRP16-1/ -2 ( EMS) EN61326+ A1 Industry Immunity ESD: EN61000-4-2: 4 kV contact discharge ( level 2) 8 kV air discharge ( level 3) Immunity RF-interference: EN61000-4-3: 10 V/ m ( amplitude-modulated, 80 MHz to 1 GHz) ( level 3) Immunity Fast Transient Noise: EN61000-4-4: 2 kV ( power line) ( level 3) Immunity Burst Noise: 1 kV line to line ( I/ O signal line) Immunity Surge: EN61000-4-5: 1 kV line to line 2 kV line to ground ( power line) Immunity Conducted Disturbance EN61000-4-6: 3 V ( 0.15 to 80 MHz) ( level 2) Immunity Voltage Dip/ Interrupting EN61000-4-11: 0.5 cycles, 0, 180 , 100% ( rated voltage) Approved standards Conforms to EN61326+ A1, EN61010-1 ( IEC61010-1) Conforms to VDE0106/ P100 ( finger protection) when the terminal cover is mounted.
Tampilkan Lebih Banyak