SICK Inductive proximity sensors IM18 Series, Cylindrical threaded housing

SICK Inductive proximity sensors IM18 Series, Cylindrical threaded housing Model Name IM18-12BNS-ZW1 Part No. 6027516 At a glance Triple operating distance up to 20 mm Operating temperature from -25 ° C to + 70 ° C High switching frequencies Sizes M18 Your benefits Reduced machine downtime and maintenance costs Large operating reserve due to triple operating distance improves machine throughput - no missed targets Saves installation space on the machine. Less space required for the same operating distance when compared with standard sensors Lower risk of mechanical damage due their ability to be mounted further from the target High level of sensitivity makes them suitable for detecting difficult parts such as wires, thin sheets, small screws – reduces design and installation time Features Housing: Cylindrical Thread size: M18 x 1 Sensing range Sn: 12 mm Assured sensing range Sa: 9.72 mm Installation type: Quasi-flush 1) Switching frequency: 500 Hz Output type: NPN Output function: NO Electrical wiring: DC 3-wire Enclosure rating: IP 67 2) Connection type: Cable, 3-wire, 2 m Housing: Standard 1) When installed in conductive materials, sensors must protrude by distance A ( A = 4 mm) 2) According to EN 60529 Mechanics/ electronics Supply voltage: 10 V DC ... 30 V DC Ripple: d 20 % 1) Voltage drop: d 2 V 2) Current consumption: d 10 mA 3) Time delay before availability: d 50 ms Hysteresis: 1 % ... 15 % Repeatability: d 5 % 4) 5) Temperature drift ( of Sr) : ± 10 % EMC: According to EN 60947-5-2 Output current Ia: d 200 mA Cable material: PVC Conductor cross-section: 0.34 mm² Cable diameter: 5 mm Short-circuit protection: Reverse polarity protection: Power-up pulse protection: Shock/ vibration: 30 g, 11 ms / 10 ... 55 Hz, 1 mm Ambient operating temperature: -25 ° C ... 70 ° C Housing material: Metal, Chrome-plated brass Housing cap material: Plastic, PBTP Housing length: 50 mm Thread length: 50 mm Tightening torque, max.: 25 Nm 1) Of VS 2) At Ia max 3) Without load 4) Of Sr 5) UB = 20 V DC ... 30 V DC, TA = 23 ° C ± 5 ° C Reduction factors Note: The values are reference values which may vary Stainless steel ( V2A, 304) : Ca. 0.63 Copper ( Cu) : Ca. 0.2 Aluminum ( Al) : Ca. 0.26 Brass ( Br) : Ca. 0.33 Installation note A: 9 mm B: 26 mm C: 18 mm D: 36 mm E: 4 mm F: 120 mm Remark: Associated graphic see " Installation"