SICK Photoelectric sensors W15, Photoelectric retro-reflective sensor, Standard optics

SICK Photoelectric sensors W15, Photoelectric retro-reflective sensor, Standard optics Model Name WL15-A1130 Part No. 1046279 At a glance Photoelectric retro-reflective sensor in hybrid design with 5 m sensing range Mounting flexibility: M18 front mount using plastic nut or snap ring, side assembly with 24.1 mm through holes Flush mounting possible using the snap ring Transparent back cover Highly visible sender LED Options with an adjustable delay of 0 - 2s Your benefits Compatible with many competitor models, making it easy to install and commission Flush mounting reduces setup time and prevents obstructions to material flow on conveyor sections Clearly visible LED indicators reduce setup time and simplify troubleshooting Quick and easy alignment due to highly visible light spot Features Sensor/ detection principle: Photoelectric retro-reflective sensor, Standard optics Dimensions ( W x H x D) : 16.2 mm x 48.5 mm x 31.9 mm Housing design ( light emission) : Hybrid Thread diameter ( housing) : M18 x 1 Sensing range max.: 0.035 m ... 5 m 1) Sensing range: 0.035 m ... 3.5 m Type of light: Visible red light Light source: LED 2) Wave length: 650 nm Angle of dispersion: 1.5 ° Light spot size ( distance) : 140 mm ( 3.5 m) 1) PL80A 2) Average service life of 100, 000 h at TA = + 25 ° C Mechanics/ electronics Supply voltage: 10 V DC ... 30 V DC 1) Ripple: d 5 Vpp 2) Power consumption: d 30 mA 3) Output type: NPN, PNP Switching mode: Dark switching Output current Imax.: d 100 mA Response time: d 1.25 ms 4) Switching frequency: 400 Hz 5) Connection type: Cable, 4-wire, 2 m 6) Cable material: PUR Conductor cross-section: 0.14 mm² Circuit protection: A, B, D 7) 8) 9) Protection class: II 10) Weight: 20 g Polarisation filter: Housing material: ABS, Plastic Optics material: PMMA Enclosure rating: IP 67 Items supplied: Snap-ring and M18 nut Ambient operating temperature: -25 ° C ... 55 ° C Ambient storage temperature: -25 ° C ... 70 ° C UL File No.: NRKH7.E189383 1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) With light/ dark ratio 1: 1 6) Do not bend below 0 ° C 7) A = VS connections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected 10) Reference voltage 50 V DC