SICK Photoelectric sensors WS/ WE100 Series

SICK Photoelectric sensors WS/ WE100 Series Photoelectric sensors W100, Through-beam photoelectric sensor Model Name WS/ WE100-N1432 Part No. 6026027 At a glance Standard miniature housing with M3 threaded mounting holes Optics with standard red LED or bright light LED Special slotted masks and polarizing filter tip adapters available as accessories Light/ dark switching and sensitivity adjustment via rotary switch possible Your benefits Highly visible light spot simplifies alignment Less contamination due to high optical operating reserve M3 threaded mounting holes provide easy installation Special accessory allows optimizing the optical performance depending on the application Features Sensor/ detection principle: Through-beam photoelectric sensor Dimensions ( W x H x D) : 11 mm x 31 mm x 20 mm Housing design ( light emission) : Rectangular, Slim Sensing range max.: 0 m ... 15 m Sensing range: 0 m ... 12 m Type of light: Visible red light Light source: LED 1) Wave length: 680 nm Sensitivity adjustment: Potentiometer, 270° Angle of dispersion: Ca. 7.2 ° Focus adjustable: - Light spot size ( distance) : Ø 1, 500 mm ( 12 m) 1) Average service life of 100, 000 h at TA = + 25 ° C Mechanics/ electronics Supply voltage: 10 V DC ... 30 V DC 1) Ripple: ± 10 % 2) Power consumption, sender: d 15 mA 3) Power consumption, receiver: d 20 mA 4) Output type: NPN Switching mode: Light/ dark-switching Output characteristic: Open collector Switching mode selector: Manually selectable Signal voltage NPN HIGH / LOW: Approx. VS / < 1.8 V Output current Imax.: d 100 mA Response time: d 0.5 ms 5) Switching frequency: 1, 000 Hz 6) Angle of reception: Ca. 15 ° Connection type: Cable, 3-wire, 2 m 7) Cable material: PVC Conductor cross-section: 0.18 mm² Circuit protection: A, B, D 8) 9) 10) Weight: 106 g Housing material: ABS/ PC/ POM, Plastic Optics material: PMMA Enclosure rating: IP 65 Ambient operating temperature: -25 ° C ... 55 ° C Ambient storage temperature: -40 ° C ... 70 ° C