SICK Photoelectric sensors WT100 Series

SICK Photoelectric sensors WT100 Series Photoelectric sensors W100, Photoelectric proximity sensor, Background blanking Model Name WT100-N1412 Part No. 6026109 At a glance Standard miniature housing with M3 threaded mounting holes Optics with standard red LED or bright light LED Available as a background blanking sensor or as an energetic proximity sensor Light/ dark switching and sensitivity adjustment via rotary switch possible ( depending on type) Wide variety of accessories available ( depending on type) Your benefits Highly visible light spot allows for quick and easy alignment M3 threaded mounting holes provide easy installation Features Sensor/ detection principle: Photoelectric proximity sensor, Background blanking Dimensions ( W x H x D) : 11 mm x 31 mm x 20 mm Housing design ( light emission) : Rectangular, Slim Sensing range max.: 4 mm ... 140 mm 1) Sensing range: 10 mm ... 100 mm Type of light: Visible red light Light source: LED 2) Wave length: 680 nm Light spot diameter ( distance) : Ø 8 mm ( 90 mm) Sensitivity adjustment: Potentiometer, 270° Focus adjustable: - 1) Object with 90 % reflectance ( referred to standard white DIN 5033) 2) Average service life of 100, 000 h at TA = + 25 ° C Mechanics/ electronics Supply voltage: 10 V DC ... 30 V DC 1) Ripple: ± 10 % 2) Current consumption: d 30 mA 3) Output type: NPN, Light/ dark-switching, manually selectable, open collector Signal voltage NPN HIGH / LOW: Approx. VS / < 1.8 V Output current Imax.: d 100 mA Response time: d 0.5 ms 4) Switching frequency: 1, 000 Hz 5) Connection type: Cable, 3-wire, 2 m 6) Cable material: PVC Conductor cross-section: 0.18 mm² Circuit protection: A, B, D 7) 8) 9) Weight: 53 g Housing material: ABS/ PC/ POM Optics material: PMMA Enclosure rating: IP 65 Ambient operating temperature: -25 ° C ... 55 ° C Ambient storage temperature: -40 ° C ... 70 ° C